Chemical Resurfacing

• There are different classifications of chemical resurfacing: AHA, BHA, Retinols, TCA, Enzymes.
• Causes a chemical reaction at the surface of the skin that dissolves the bonds between the skin cells.
• Varying intensity and penetration.
• Can be delivered in low doses on a daily basis or as a stand alone treatment delivered by a trained technician.

• Skin may require pre-treating with lower dose prior to procedure.
• Down time varies depending on the dose delivered.
• Topical products used for homecare may need to be prescribed by a physician.

• Can treat a wide range of conditions.
• Can be used as part of a daily maintenance routine.
• Broad range of penetration level available from mild – deep.
• Improves texture of the skin.
• Reduces unwanted pigmentation.
• Treats acne and related scarring.

Granular Exfoliants

• Granular product that is massaged over the skin.
• Lifts dead surface layer of skin.
• Available in various formulations and intensity.
• Product contain microbeads or granules that slough the outer layer.
• Mild resurfacing.
• Not typically recommended for acneic or sensitive skin.

• • Instant results.
  • Can be used daily as part of a regular skin care routine.
  • No downtime.
  • Increases absorption of products.
  • Stimulates circulation.

Dermaplaning

• Technician performs feathery strokes typically using a 10 gauge blade held at an angle over the surface of the skin.
• Removes surface layer of the skin.
• Form of mechanical skin resurfacing.

• • Also removes the vellus hair in the area treated.
  • Delivers instant results.
  • Minimal downtime.
  • Can alleviate and treat eczema, skin irritations, and excessively dry patches.
  • Promotes increased hydration and penetration of topical medications and treatment product.

Microdermabrasion

• Technician uses a wand over the skin to remove superficial layers.
• Can be performed with a diamond encrusted tip being dragged over the skin or using a crystal spray to gently “sandblast” the surface of the skin.
• Not recommended for acneic skin or highly sensitive skin types.
• Mild – mid level resurfacing.

• • Minimal downtime required.
  • Can be paired with other methods of resurfacing for optimal results.
  • Improves circulation.
  • Improves texture.
  • Lightens pigmentation.

Abrasive Materials

• Used to lift the dead surface layer of the skin by causing friction.
• Brushes bristles vary from soft – hard.
• Can be used with products for added cleansing.
• Abrasive materials include loofas, pumice, and other textured materials in varying coarseness.
• Mild resurfacing.
• Not recommended for sensitive or sensitized skin

• • Can be used as part of a daily routine or in a professional service.
  • Instant results.
  • No downtime.
  • Increases circulation.

Dermabrasion

• Performed by a medical professional.
• Anesthetic is used to numb the skin prior to treatment.
• In some cases a prescribed relaxant may be given to ease the patient.
• Technician operates a high-speed device that scrapes away layers of skin.
• Mid – deep resurfacing.

• • Delivers deep resurfacing with minimal sessions.
  • Can remove deep imperfections.
  • Dramatic results can be achieved.

Microneedling

• Pierces fine needles into the surface of the skin creating micro-lesions.
• Varying levels of intensity depending on the device.
• Minimal – no downtime required.

• • Tightens pores and smooths texture.
  • Effective on minimizing the appearance of stretch marks and acne scarring.
  • Improves circulation.
  • Stimulates collagen and elastin production.

IPL Skin Rejuvenation

• Stands for Intense Pulsed Light.
• Device emits a broad band light energy into the skin.
• Works below the surface of the skin on a cellular level, leaving the surface layer intact.
• Depth of penetration varies medium – deep.

• • Minimal down time, if any.
  • Reduces redness and surface capillaries.
  • Removes pigmentation and evens skin tone.
  • Improves texture and tightens pores.
  • Reduces fine lines and pre-mature aging.
  • Treats acne and related scarring.

LASER Skin Resurfacing

• Acronym for Light Amplification by Stimulated Emission of Radiation.
• Device emits a focused beam of light energy into the skin.
• Depth of penetration varies from medium – deep.
• Down time ranges depending on the type of laser used.

• • Improves textural damage.
  • Reduces signs of aging.
  • Reduces redness and vascularity from facial and body region.
  • Removes unwanted pigmented lesions.
  • Treats acne and related scarring.

Description: Chemical peels work by separating the upper layers of the skin causing an accelerated cell rejuvenation rate. Because of their molecular structure, these acids are able to penetrate past the acid mantle of the skin and deep into the layers beneath the surface of the skin and dissolve away dead cells. This causes your skin to shed and regenerate a new layer of skin in a 1 to 2 week period.

The acids we use in our professional chemical peels are typically derived from natural sources and produced for safe usage on the skin.

Our Enzyme Peel is a 20% multi-fruit acid complex. It is made of white grape wine and fresh fruit pulp that gently exfoliates the upper epidermis while wine polyphenols condition the skin.

Pre-treatment protocols:

• Must not currently be on or have used Accutane or any other oral prescription acne medications in the past 12 months
• If currently using any products containing AHA/BHA/Retin A/Vitamin A on the area being treated, you must discontinue usage 2 weeks prior to procedure
• Must wait a minimum of 1 week from last tanning session

Time frame: 15-30 minutes

Recommended sessions: 4-8

Downtime required: 1-7 days

Contraindications:

• Diabetes
• Pregnancy
• Skin cancer (remission under 2 years)
• Use of photosensitive medication and herbs
• Active infection of Herpes Simplex in treatment area
• Active skin infection

Potential side effects:

• Discomfort
• Fragile skin
• Edema (swelling)
• Erythema (redness)
• Visible shedding